Bowflex BXT116 Service Manual page 89

5. Make sure that there is safe clearance around, above, and to one side
of the treadmill. Tilt the machine onto the side being sure not to grasp the
Console.
A second person is required to assist with the tilting of the
machine. Do not tilt the machine unless the walking deck is in
the folded, locked position. Be sure there is adequate clear-
ance for the raised deck. Some components of the equipment
can be heavy or awkward. Enlist the service of a second
person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your
own.
The following images show the machine upright,
!
and not fully resting on its side. The machine must
be on its side to safely complete the following
steps.
6. Using a 10mm wrench, loosen the locking nut for the Release Cable
(indicated by arrow).
7. Using a 14mm wrench, disconnect the securing nut and remove the
Release Cable Assembly from the Lift Shock.
8. Using a 13mm wrench and a 6mm hex wrench, remove the indicated
hardware (with ovals) from the Lift Shock Assembly.
Be aware that when the Lift Shock is released from the Frame
Assembly, the Lift Shock and Base Frame Weldment may
abruptly move. Be sure to keep clear of any potential pinch
opportunities from this motion.
89
Lift Shock Assembly