6. Gently release the front snaps (indicated by ovals) that secure the
Motor Cover and pivot it back toward the walking belt until it releases.
Remove from the machine.
7. Using a 6mm hex wrench, loosen the indicated screws (by arrows) on
the Motor Mount.
8. Using a 13mm Open Ended Wrench, rotate the Belt Tensioner Screw
enough to loosen the Drive Belt.
Drive Belt
Note: To assist with reassembly, be sure to record the number of threads
Belt Tensioner Screw
exposed before loosening.
9. Using a 6mm hex wrench, remove the indicated screws from the Motor
Mount. Remove the Drive Belt and rotate the Motor Assembly exposing
the Motor Mount.
Motor
Motor Mount
10. Using a 6mm hex wrench, remove the indicated hardware from the
Motor Mount.
128