Bowflex BXT116 Service Manual page 47

6. Disconnect the Lower I/O and Grounding Cables.
7. Cut the Zip-Tie that secures the Cables to the Frame Assembly.
8. Gently release the front snaps (indicated by ovals) that secure the
Motor Cover and pivot it back toward the walking belt until it releases.
Remove from the machine.
9. Make sure there is sufficient space to tilt the machine onto the left side.
Keep a minimum clearance behind the machine of 79" (2 m)
and 24" (0.6 m) on each side. This is the recommended safe
distance for access, movement and emergency dismounts
from the machine.
Note: THE FOLLOWING STEP MAY REQUIRE A SECOND PERSON.
10. Tilt the machine onto the left side.
Be sure the area is clear around the machine before tilting it. Do not grasp the Walking Belt since it can abruptly move.
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and
others are all physically fit and able to move the machine safely.
11. Using two 17mm wrenches, remove the indicated hardware (with arrow) from the Incline Motor Assembly.
Base Frame Weldment
Bottom Motor Cover
47
Motor Cover
Incline Motor Assembly
Cable Connectors