Bowflex BXT116 Service Manual page 72

6. Gently release the front snaps (indicated by ovals) that secure the
Motor Cover and pivot it back toward the walking belt until it releases.
Remove from the machine.
7. Using a 6mm hex wrench, loosen the indicated screws (by arrow) on
the Motor Mount.
8. Using a 13mm Open Ended Wrench, rotate the Belt Tensioner Screw
enough to loosen the Drive Belt.
Note: To assist with reassembly, be sure to record the number of threads
Drive Belt
exposed before loosening.
Belt Tensioner Screw
Motor
9. Using a 6mm hex wrench, remove the indicated screw from the Front
Roller.
Front Roller
72