Bowflex BXT116 Service Manual page 51

6. Gently release the front snaps (indicated by ovals) that secure the
Motor Cover and pivot it back toward the walking belt until it releases.
Remove from the machine.
7. Using a #2 Phillips screwdriver, remove the 2 indicated screws from
the Motor Control Board Cover. Lift and remove the Motor Control Board
Cover.
Motor Control Board Cover
8. From the front, remove the Securing Ring from the Circuit Breaker by
rotating it counter-clockwise. Remove the Circuit Breaker from the Frame.
9. Remove the connectors and attach them to the new Circuit Breaker.
10. Insert the new Circuit Breaker into the Frame and install the Securing
Ring.
Circuit Breaker
51