Bowflex BXT116 Service Manual page 43

7. Push the Deck Release Handle to disengage the Plunger within the Lift
Shock, and remove the outer (black) tube from the Lift Shock (as shown
here).
Deck Release Handle
8. Scrape off any tape from the inner (silver) tube using a utility knife or
blade. Remove as much tape as possible. Remove any remaining tape
residue from silver tube by cleaning with paper towel and rubbing alcohol
or other cleaner (Goof Off , etc.). The entire silver tube should be com-
®
pletely clean/free of residue.
Be extremely careful and be sure to cut away from yourself.
Always keep your other hand out of the direction of the blade.
43