Scanning Originals In Several Times - Ricoh 2045e Scanner Reference

Setting Originals
Scanning Originals in Several
Times
Multiple originals can be scanned as a
single file by dividing them and scan-
ning them using the exposure glass or
the ADF. When scanning originals di-
viding in several times, there are two
waiting status for setting additional
originals: the machine waits for a des-
3
ignated time, or keeps waiting until
an additional original is set.
Specifying a time limit for additional
originals
In advance, specify the waiting time
in seconds for placing the additional
originals.
• Scanning using the exposure glass
Select [Set Wait Time] for [Wait Time
for Next Orig.: Exposure Glass].
• Scanning using the ADF
Select [Set Wait Time] for [Wait Time
for Next Original(s): SADF].
Reference
p.16 "Wait Time for Next Orig.: Ex-
posure Glass" or "Wait Time for
Next Original(s): SADF"
A
Place the originals.
Reference
p.35 "Placing Originals"
Note
r Originals are scanned in order.
Place them from the first page.
42
B
Make settings for scanning area
and original orientation.
Reference
p.39 "Original Orientation and
Scan Area"
C
Make settings for sending by e-
mail, Scan to Folder, storing, or
delivering.
Reference
p.47 "Procedure for Sending E-
mail"
p.61 "Procedure for Sending by
Scan to Folder"
p.74 "Storage Procedure"
p.87 "Delivery Procedure"
When using the exposure glass
A Press the {Start} key.
When scanning is finished, the
remainder time until the addi-
tional original is placed is dis-
played.
B When there are additional
originals, place them within
the specified time, and them
press the {Start} key.
Repeat this procedure until the
last original is scanned.