Ricoh 2045e Scanner Reference page 116

Appendix
Message
Captured file exceeded max. number of
pages per file. Cannot send the
scanned data.
Connection with LDAP server has
failed. Check the server status.
Entered protection code for destina-
tion is incorrect. Please re-enter.
Exceeded max. data capacity. Check the
scanning resolution, then press Start
again.
Exceeded max. data capacity. Check the
scanning resolution, then reset nnn
original(s).
Note
r "nnn" in the message represents changeable
number.
Exceeded max. E-mail size. Sending E-
mail has been cancelled. Check [Max.
E-mail Size] in Scanner Features.
9
Exceeded max. file capacity. Delete
the unnecessary stored files.
Exceeded max. No. of search results
which can be displayed.
Max.: nnn
Note
r "nnn" in the message represents changeable
number.
Exceeded max. number of alphanumeric
characters.
106
Causes and solutions
The maximum number of pages
which can be stored as a single file is
1000. Reduce the number of pages
and send them again.
A network error has occurred and
connection has failed. Try the opera-
tion once more. If the message is still
shown, the network may be crowd-
ed. Check the information of System
Settings.
Make sure the protection code is cor-
rect, and then enter it again.
Specify the scan size and resolution
again. Note that it may not be possi-
ble to scan very large originals at a
high resolution. See p.99 "Relation-
ship between Resolution and File
Size".
Specify the scan size and resolution
again. Note that it may not be possi-
ble to scan very large originals at a
high resolution. See p.99 "Relation-
ship between Resolution and File
Size".
• Increase the size of [Max. E-mail
Size].
• Set [Divide & Send E-mail] to [Yes
(per Page)] or [Yes (per Max. Size)].
The maximum number of files that
can be stored is 3000. Reduce the
number of files or delete unneeded
files.
Search again after changing the
search conditions.
Make sure the maximum number of
characters which can be entered, and
then enter it again.