Ricoh 2045e Scanner Reference page 79

If the entered number is less
than five digits long, press the
{#} key after the last number.
Example: To enter 00002
Press the {2} key, and then
press the {#} key.
Note
r When a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. When the
protection code you entered
is correct, the sender name is
displayed.
C Press [OK].
Searching to select a sender
A Press [Attach Sender's Name].
B Press [
].
Sending Scan File by Scan to Folder
C Press [User (Dest.) Name].
The soft keyboard is displayed
for entering a sender name.
D Enter part of the sender name.
Note
r Enter the first character or
characters of the sender
name.
r It is necessary to differentiate
between capital and small
letters.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
E Press [OK].
F Select the sender.
Note
r When a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. When the
protection code you entered
is correct, the sender name is
displayed.
G Press [Exit].
H Press [OK].
5
69