Lenovo ThinkServer TS460 User Manual And Hardware Maintenance Manual page 42

Figure 16. Front view
Figure 17. Rear view
1 – 4 Slot 0–slot 3
Used to connect 3.5-inch drives.
5
Mini-SAS signal cable connector
Used to connect to the mini-SAS connector on the RAID card. You also can use a SATA to mini-SAS signal
cable to connect the backplane to the SATA connectors on the system board.
6 8-pin power connector
Used to connect to an 8-pin power connector on the power distribution board or system board.
Backplane for up to eight 2.5-inch drives
This topic provides information to help you locate the connectors on the backplane for up to eight 2.5-inch
drives.
30
ThinkServer TS460 User Guide and Hardware Maintenance Manual