Lenovo ThinkServer TS460 User Manual And Hardware Maintenance Manual page 135

Figure 101. Installing the server cover
5. Tighten the thumbscrew on the server cover to secure the server cover in place.
Note: For safety consideration, ensure that you use a tool, for example a screwdriver, to tighten the
thumbscrew and always ensure that the thumbscrew is securely installed. Also, do not over-tighten the
thumbscrew.
6. Lock the server cover and server front door (available on some models) to ensure the security. See
"Server locks" on page 19.
7. Reconnect all the external cables.
Attention: To avoid component damage, connect the power cords last.
8. Update the server configuration.
• Download and install the latest device drivers. You can visit the Lenovo Web site at
http://www.lenovo.com/drivers
• Update the BIOS configuration: "Using the Setup Utility program" on page 37
• Update the RAID configuration: "Configuring RAID" on page 45
• Update your system firmware: "Server setup procedure" on page 5
0
M
G M
T
1
2
1
3
4
2
ID
.
.
Chapter 5 Replacing hardware
123