Off-Line - SATO CL412E Operator And Technical Reference Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
SATO CL Series "e" Printers
Off-Line/Pause
<ESC>@,nn . . . n
nn...n = Optional message to be displayed on the LCD.
Maximum of 32 characters.
Example: See above
Placement: Anywhere in the print job between the <ESC>A and
<ESC>Z
Default: None
To specify the printer to come to an off-line state. When used within a
print job, the printer goes off-line after finishing the print job.
@, LOAD BLUE LABELS AND PLACE PRINTER ON-LINE
There is no printer output for this command. The printer is placed in
the Off-Line mode as soon as the current print job is finished.
1. You must press the LINE key on the front panel to return the
printer to an On-Line status (see Operator Panel in Section 2 of
this manual).
2. Remember, when using this command, that the print job specifies
<ESC>Q10, all ten labels will print before the printer goes off-line.
PN 9001074 Preliminary
Section 5. Programming Reference
Page 5-59