Cut Job - SATO CL412E Operator And Technical Reference Manual

Section 5. Programming Reference
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 5-34

Cut Job

<ESC>~aaaa
aaaa = Number of labels to print between each cut (1-9999)
Example: <ESC>~2
Placement: Following the Print Quantity command <ESC>Q
Default: <ESC>~1 (if cutter enabled)
To control the cutting of labels when using a SATO cutter unit with the
printer printer. This command allows the cutting of a multi-part tag or
label at a specified interval within a print job.
~0002
This set of commands will print 6 labels (3 x 2) with two labels
between each cut.
Cut
2pc
ABC ABC
1. You must have the optional printer Cutter to use this function.
Contact your SATO representative for more information.
2. To use this command, the printer configuration must have the
cutter option enabled. See Printer Configuration commands in this
section manual.
3. If the cutter option has been enabled in the printer configuration
and the cut value (a = 0), the cutter is inactive.
4. A "~" (tilde) character or <NUL> (ASCII 00 Hex) character can be
can be used in this command. It is recommended that the "~" be
used whenever possible.
5. When using the Cutter command, the total number of labels
printed is the product of the cut value and the print quantity.
PN 9001074 Preliminary
Cut
ABC ABC ABC
6pc
SATO CL Series "e" Printers
Cut
ABC