Print Type - SATO CL412E Operator And Technical Reference Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
SATO CL Series "e" Printers

Print Type

<ESC>PHa
a = 0 Thermal Transfer printing
1 Direct Thermal Printing
Example: See above
Placement: Separate data stream sent to printer
Default: Default value set by <ESC>PC command.
To set the printing method used for a job
PH1
There is no printer output as a result of this command.
1. When power is cycled, the value set by this command is lost and
replaced by the default value stored in the EEPROM.
2. To change the value stored in the EEPROM, use the <ESC>PC
Printer Setting command or use the Printer Setting Utility program
contained on the CDROM shipped with the printer.
3. This value can also be set by DSW2-1.
9001074 Preliminary
Section 5. Programming Reference
Page 5-121