Switches And Sensors; Cl608 And Cl612 - SATO CL412E Operator And Technical Reference Manual

Section 2. Installation

SWITCHES AND SENSORS

Ribbon End Sensor:
Head Open Switch:
Label Sensor Unit:
Label Sensor
Unit
.12 in (3 mm) W x .24 in. (6 mm) L
1.0" (25 mm) to 3.5" (90 mm)
Label Gap Sensor
Backing
Paper Inside
Edge
CL608e and CL612e Label Sensor Positioning
Page 2-18
This sensor is a motion detector that signals the printer
when the ribbon supply is turning.
When the print head is opened, this switch is activated
and the printer will stop printing.
This sensor unit contains two types of sensors, one for
label gap and one for Eye-Mark sensing.
Miminum Eye-Mark Size
0.33" (9 mm) Eye-Mark Sensor
Label Inside Edge
PN 9001074 Preliminary
CL608e and CL612e
Direction
Min. Inter-Label Gap
0.12" (3 mm)
SATO CL Series "e" Printers
Ribbon
Motion
Sensor
Label
Feed