KEY POINTS
•
The following conditions are required to display a time chart.
Only one LOG number is selected.
-
The target LOG is set to "Trace".
-
The logging/trace done flag of the target LOG is "ON".
-
When the stop tirgger is detected, the "Trace stop trigger monitor flag"
and "Trace data acquisition done flag" turn on.
•
The time chart cannot be activated during executing the logging/trace
operation.
•
The indication of the "Buffer free space" of the LOG that has been set to
Trace is always zero.
5.3 Trace Monitor (Time Chart)
5-7