Panasonic FP0H User Manual page 61

 Display Setting (Device tab)
Make the display setting of devices used for the time chart.
Item
Device List
Set the
maximum/minimum of
data type
Set the
maximum/minimum of
trace data
Set arbitrary
maximum/minimum
values
Y-axis Display Whole
Range:
Upper End
Lower End
Side-by-side (Asc.)
Side-by-side (Desc.)
Cascade
Y-axis Scale Interval
Range
-
-
-
-
-
1 to 99999
0 to 99998
-
-
-
1-Upper end of display
position-Lower end
5.3 Trace Monitor (Time Chart)
Description
Registered devices are listed. Check the check box of
a device for which the setting is made.
Set the maximum and minimum values of the data
type of the selected device.
Set the maximum and minimum values of trace data of
the selected device.
Maximum and minimum values are set by a user.
The whole range of the displayed grids of Y axis is
displayed.
Set the upper end of the display position of the
selected device.
Set the lower end of the display position of the
selected device.
All checked devices are displayed side by side in
ascending order from the base line.
All checked devices are displayed side by side in
descending order from the base line.
All checked devices are displayed in cascading view.
The interval to display the scale next to the Y axis of
the selected device is set. When the upper and lower
ends of the display position are smaller than the Y-
axis scale interval, this set value also becomes
smaller.
5-11