3. Double-click a desired buffer memory from the list on the right.
The LOG0 to LOG3 file settings dialog box appears.
4. Set information in each field of File definition, Data logging condition and
Trace stop.
For the details of setting methods, refer to "2.3.2 LOG File Setting Items (For
Trace)".
5. Press the [OK] button.
This returns to the Logging/Trace Settings dialog box.
KEY POINTS
•
"No. of samplings after stop trigger" is available only when the stop trigger
is set to Bit.
•
Check the box of "Write file after completion of trace" to create a file in a SD
memory card after the completion of trace.
2.3 Trace Information Setting
2-9