Panasonic FP0H User Manual page 59

Code Name
C-1 Menu bar
C-2 Toolbar
Function
①
Menus for operating time chart configuration files are collected here.
②
Menus for searching devices specified on the time chart are collected here.
③
Menus for registering devices and setting sampling conditions.
④
Menus for setting the display of time chart.
⑤
Menus for displaying, selecting and moving a cursor.
⑥ Menus for configuring settings relating to the trace operations such as starting the
trace operation and uploading trace data.
⑦
Shows the version information on the time chart monitor.
①
Opens a time chart configuration file.
②
Saves the time chart configuration file.
③
Applies the setting configured by FP TIme Chart monitor to FPWIN GR7.
④
Searches a device specified on the Time Chart.
⑤
Downloads the trace setting to FPWIN GR7.
⑥
Switches the PLC mode to "RUN" or "PROG.".
⑦
Starts Trace/Free run.
⑧
Stops Trace/Free run.
⑨
Generate a trigger. (Available in the sampling trace mode.)
⑩
Uploads trace data from the PLC, and displays the time chart.
⑪
Enlarges the time scale.
⑫
Reduces the time scale.
⑬
Switches whether to select cursors AB simultaneously or not.
⑭
Moves to cursor A.
⑮
Moves to cursor B.
⑯
Moves to cursor T.
5.3 Trace Monitor (Time Chart)
5-9