Mib-Ii - Comtech EF Data CDD-562AL Installation And Operation Manual

Multi-channel demodulator
Table of Contents

Advertisement

CDD-562AL/564A/L Multi-Channel Demodulator
Ethernet-based Remote Product Management
Cold Start
Link Up
Authentication Failure
The CDD-56xA/L supports these Alarms and Faults v1 traps / v2 notifications:
cdd564aUnitAlarmTrap
cdd564aRxAlarmTrap
cdd564aLNBAlarmTrap
cdd564aUnitAlarmNotification
cdd564aRxAlarmNotification
cdd564aLNBAlarmNotification
7.3.7

MIB-II

The demodulator agent uses RFC 1213, Management Information Base for Network Management of
TCP/IP-based Internets. This is known as "MIB-II" or "Public MIB support." For detailed OID
information, see the MIB file.
The agent uses these Groups:
Group
System Group
Interface
IP
ICMP
TCP
UDP
SNMP
Address Translation Group
EGP
Table 7-2 MIB-II SNMPv2 notifications
Table 7-3 Alarms and Faults SNMPv1 traps
Table 7-4 Alarms and Faults SNMPv2 notifications
Table 7-5. MIB-II Support
Mandatory for RFC1213
Mandatory for RFC1213
Mandatory for RFC1213
Mandatory for RFC1213
Mandatory for RFC1213
Mandatory for RFC1213
Mandatory for RFC1213
Implemented but depreciated in MIB-II
Not applicable
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.5
6247941
6247942
6247943
1.3.6.1.4.1.6247.94.2.1.1
1.3.6.1.4.1.6247.94.2.1.2
1.3.6.1.4.1.6247.94.2.1.3
Comments
7–4
Revision 0
MN-CDD562AL564AL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdd-564alCdd-564a

Table of Contents