CDD-562AL/564A/L Multi-Channel Demodulator
IP Module Ethernet Interface
4.4.1.1
Router Working Mode with DVB Overlay
Figure 4-1 shows an example setup using the CDD-562L L-Band Satellite Dual Demodulator at a Hub
site to receive two separate return channels.
•
The CDD-562L and all CDM-IP modems are in Point-to-Point Mode.
•
Each remote site has a CDM-IP modem with a default static route.
•
The CDD-562L has a default static route directing traffic to the hub router.
•
The hub router would have routes defined for each remote network that would be directed to
the DVB Encapsulator.
Figure 4-1. (CDD-562L) Router Mode Point-to-Point Diagram
Figure 4-2 shows an example setup using the CDD-564 (70/140 MHz) or CDD-564L (L-Band) Satellite
Quad Demodulator at a Hub site to receive three separate return channels.
•
The demodulator and all CDM-IP modems are in Point-to-Point Mode.
•
Each remote site has a CDM-IP modem with a default static route.
•
The demodulator has a default static route directing traffic to the hub router.
4–9
Revision 0
MN-CDD562AL564AL