Table of Contents
Advertisement
CDD-562AL/564A/L Multi-Channel Demodulator
HTTP (Web Server) Interface
C DD-56xA L as S erver
IGMP
Read-only; if enabled, the IP Module responds to IGMP queries for the configured multicast routes on the
transmit side and generates IGMP queries on the receive side.
IGMP Query Period
Enter the query period length in seconds; Range is 1 through 600 seconds.
IGMP Maximum Response Time
Enter a maximum response time value; Range is 1 through 598 seconds. You must set this value to one
second less than the set IGMP Query Period.
Missed Responses before leaving IGMP Group
Enter the allowable number of missed responses; Range is 1 through 30.
When finished, click Submit to save and activate these changes.
IG MP T able
This read-only window shows the IGMP groups that are active on the demodulator. Data shown includes:
•
Index
•
TTL (Time to Live) for the entry
•
Client State: Idle, Active or Closing
•
SRC Entry
•
Group Entry
Click Refresh to update the data shown.
10.5.6 Configuration | WAN | Decryption
This page is available only if the 3xDES FAST feature was purchased and activated, along with
the EN version of firmware.
See also: Chapter 9. Telnet and CLI Operation.
10–28
Revision 0
MN-CDD562AL564AL
Advertisement
Table of Contents
