Comtech EF Data CDD-562AL Installation And Operation Manual page 129

CDD-562AL/564A/L Multi-Channel Demodulator
Telnet and CLI Operation
Downlink Mcast, keystroke: none, read-only
•
Shows Read-only status of Downlink Multicast as [Enabled] or [Disabled].
•
This is enabled or disabled on the Administration | Feature Configuration screen.
9.2.2.4 Protocol Configuration screen
Go to the Protocol Configuration screen from the Main Menu.
IGMP, keystroke: I
•
Opens the IGMP Information screen.
•
See Section 9.2.2.4.1
ARP, keystroke: A
•
Opens the ARP Table Utilities screen.
•
See Section 9.2.2.4.2
Brouter Mode, keystroke: B
•
Opens the (VLAN) Brouter Configuration screen.
•
See Section 9.2.2.4.3
9–23
Revision 0
MN-CDD562AL564AL