240V Alternating Current (Ac) Power Interface (Standard); Figure 3-2. Cdd-56Xa/L Ac Power Interface; Figure 3-3. Applying Ac Power To The Cdd-56Xa/L - Comtech EF Data CDD-562AL Installation And Operation Manual

CDD-562AL/564A/L Multi-Channel Demodulator
Rear Panel Connections
3.3.2 100V/240V Alternating Current (AC) Power Interface (Standard)
3 IEC Three-prong Connector
Input Power
Input Voltage
Connector Type
Fuse Protection
3.3.2.1 AC Operation – Applying Power

Figure 3-3. Applying AC Power to the CDD-56xA/L

To apply AC power to the CDD-56xA/L (Figure 3-3):
1. Plug the provided AC power cord female end into the unit.
2. Plug the AC power cord male end into the user-supplied power source.
3. Switch the unit ON.

Figure 3-2. CDD-56xA/L AC Power Interface

AC Power Specifications
106 W maximum, 63 W typical
100 V to 240 V AC, +6%/-10%, autosensing
(total absolute max. range is 90 V to 254 V AC)
IEC
Line and neutral fusing
(2X) 5mm x 20mm Slow-blow type fuses:
T2 (2.00 Amp) (100 V or 240 V AC operation)
2 Press-fit Fuse Holder
3–7
Revision 0
MN-CDD562AL564AL
1 On / Off Switch