Comtech EF Data CDD-562AL Installation And Operation Manual page 122

CDD-562AL/564A/L Multi-Channel Demodulator
Telnet and CLI Operation
9.2.2.1.6 Working Mode
NOTE: The CDD-56xAL demodulator only supports Router Mode.
On the Administration screen, type C for the Working Mode parameter:
CAUTION
Changing the Working Mode causes the unit to reboot.
At the prompt, type 'Y' to proceed, and then select the desired Working Mode.
•
1 -- Router – Small Network
•
2 -- Router – Large Network
•
3 -- Router – Point to Point
•
4 -- Router – Vipersat
Otherwise, press the [ESC] or [Enter] keys to stop the command and return to the Administration screen.
9–16
Revision 0
MN-CDD562AL564AL