At+Icf Serial Interface Character Framing - Siemens TC35i User Manual

TC35i AT Command Set
4.7 AT+ICF
4.7

AT+ICF Serial Interface Character Framing

The command can be used to set or query the character framing.
AT+ICF
Syntax
Test Command
AT+ICF=?
Response(s)
+ICF: (list of supported
OK
Read Command
AT+ICF?
Response(s)
[,
+ICF: <format> <parity>
OK
Write Command
AT+ICF= [ ][,
<format>
Response(s)
OK
ERROR
PIN ASC0 MUX1
! % §
Reference(s)
V.25ter
Command Description
The test command returns the values of the supported character framings.
The read command returns the currently selected character framing.
The write command determines the serial interface character framing format and parity used for receiving and
transmitting.
Parameter Description
(num)(&W)(&V)
<format>
Specifies the character format used for receiving and transmitting.
1
TC35i_ATC_V02.07
Confidential / Released
s), (list of supported
<format>
]
]
<parity>
MUX2 MUX3
§ §
8 data 0 parity 2 stop
Page 94 of 439
s)
<parity>
s
m
obile
1/30/04