Siemens TC35i User Manual page 57

TC35i AT Command Set
2.14 AT^SCFG
Examples
EXAMPLE 1
Enable sending of a short message (SMS) on next DTR activation (OFF-ON transition). Sent SMS is
assumed to be stored at first location of storage selected with
sent from either SIM or ME storage.
Also refer to
AT+CMSS
time there is no need to wait until all calls have ended. (
AT+CMGF=1
OK
AT+CNMI=1,1
OK
AT+CMGD=1
OK
AT+CMGW="01522400045",145
>Test-SMS to be sent from storage!
+CMGW: 1
OK
AT^SCFG="AutoExec",1,0,0,0,"AT+CMSS=1"
^SCFG: "AutoExec","1","0","0","0","at+cmss=1"
^SCFG: "AutoExec","0","1","0","0","","000:00:00","000:00:00"
^SCFG: "AutoExec","0","1","1","0","","000:00:00","000:00:00"
^SCFG: "AutoExec","0","1","2","0","","000:00:00","000:00:00"
OK
If a DTR activation has occured the ME issues the URC "
command; the message reference in this case:
^SCFG:"AutoExec",0,0,1,0,"AT+CMSS=1"
OK
+CMSS: 16
EXAMPLE 2
Perform a reset with the TC35i periodically after 10 hours, but wait for all calls have ended.
For details regarding software controlled power down refer to
AT^SCFG="AutoExec",1,1,2,5,"AT+CFUN=0,1","010:00:00"
...
OK
After ten hours:
^SCFG:"AutoExec",1,1,2,5,"AT+CFUN=0,1"
OK
SYSSTART
TC35i_ATC_V02.07
Confidential / Released
and . Since SMS transmission and ongoing calls are possible at the same
AT+CMGW
Page 57 of 439
and
AT+CPMS AT^SSMSS
=0).
<AutoExecMode>
Enable SMS text mode
Enable "+CMTI:" URC on any received SMS
Delete first SMS location
Store an SMS with
text entry (finish with CTRL-Z)
SMS confirmed to be stored at first location
Enable execution on next DTR activation
" followed by the response of the executed
^SCFG:
"AT+CMSS=1" command entry confirmation
and
AT+CFUN AT^SMSO
"AT+CFUN=0,1" command entry confirmation
TC35i has restarted
s
m
obile
, i.e. SMS may be
.
1/30/04