Status Control Commands; At+Cmer Mobile Equipment Event Reporting - Siemens TC35i User Manual

TC35i AT Command Set

3. Status Control Commands

3. Status Control Commands
The AT Commands described in this chapter allow the external application to obtain various status information
from the TC35i.
3.1

AT+CMER Mobile Equipment Event Reporting

This command controls details of the "
via these commands the URCs are sent whenever a value of the related indicator changes.
After has been switched on, URCs for all registered indicators will be issued.
AT+CMER
Syntax
Test Command
AT+CMER=?
Response(s)
+CMER: (list of supported
supported s), (list of supported
<ind>
OK
Read Command
AT+CMER?
Response(s)
,
+CMER: <mode> <keyp>
OK
Write Command
AT+CMER= [ [,
<mode> <keyp>
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 MUX1
% % %
Reference(s)
GSM 07.07
TC35i_ATC_V02.07
Confidential / Released
" URC presentation related to
+CIEV
s), (list of supported
<mode>
s)
<bfr>
, , ,
<disp> <ind> <bfr>
[, [, [,
<disp> <ind> <bfr>
MUX2 MUX3
% %
Page 61 of 439
AT^SIND
s), (list of supported
<keyp>
]]]]]
s
m
obile
and . If registered
AT+CIND
s), (list of
<disp>
1/30/04