At+Cr Service Reporting Control - Siemens TC35i User Manual

TC35i AT Command Set
7.23 AT+CR
7.23

AT+CR Service reporting control

Syntax
Test Command
AT+CR=?
Response(s)
+CR: (list of supported
OK
Read Command
AT+CR?
Response(s)
+CR: <mode>
OK
Write Command
AT+CR=<mode>
Response(s)
OK
PIN ASC0 MUX1
§ % %
Reference(s)
GSM 07.07
Intermediate Result Code
If enabled, an intermediate result code is transmitted at the point during connect negotiation when the TA has
determined the speed and quality of service to be used, before any error control or data compression reports are
transmitted, and before any final result code (e.g. CONNECT) appears.
+CR: <serv>
Command Description
Configures the TA whether or not to transmit an intermediate result code +CR:
set up.
TC35i_ATC_V02.07
Confidential / Released
s)
<mode>
MUX2 MUX3
! !
Page 174 of 439
s
m
to TE when a call is being
<serv>
obile
1/30/04