At+Csca Sms Service Centre Address - Siemens TC35i User Manual

TC35i AT Command Set
11.13 AT+CSCA
11.13

AT+CSCA SMS service centre address

Syntax
Test Command
AT+CSCA=?
Response(s)
OK
Read Command
AT+CSCA?
Response(s)
,
+CSCA: <sca> <tosca>
OK
Write Command
[,
AT+CSCA=<sca> <tosca>
Response(s)
OK
PIN ASC0 MUX1
% % %
Reference(s)
GSM 07.05
Command Description
Write command updates the SMSC address, through which mobile originated SMs are transmitted. In text mode,
setting is used by send and write commands. In PDU mode, setting is used by the same commands, but only
when the length of the SMSC address coded into
Notes
• In case of using no parameter after AT+CSCA= the content of
• This command writes the service centre address to non-volatile memo
• The SMS service centre address should be entered as specified by the service provider
TC35i_ATC_V02.07
Confidential / Released
]
MUX2 MUX3
% %
<pdu>
Page 300 of 439
parameter equals zero.
will be deleted
<sca>
s
m
obile
1/30/04