Atdl Redial Last Telephone Number Used - Siemens TC35i User Manual

TC35i AT Command Set
7.7 ATDL
7.7

ATDL Redial last telephone number used

Syntax
Exec Command
ATDL [;]
Response(s)
If there is no last number or number is not valid:
+CME ERROR
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
If successfully connected and non-voice call (TA switches to online data mode):
CONNECT <text>
When TA returns to command mode after call release:
OK
If successfully connected and voice call:
OK
PIN ASC0 MUX1
% % %
Reference(s)
V.25ter
Command Description
This command redials the last voice and data call number used in the ATD command. If terminated with semi-
colon ";" ATDL dials the last voice call number stored in the "LD" phonebook. Otherwise, the last dialed data or
fax number will be used (not contained in the "LD" phonebook).
Note
• This command may be aborted generally by receiving a character during execution. Abortion is not possible
during some states of connection setup such as handshaking.
TC35i_ATC_V02.07
Confidential / Released
MUX2 MUX3
§ §
Page 153 of 439
s
m
obile
1/30/04