TC35i AT Command Set
7.23 AT+CR
Parameter Description
(num)(&W)(&V)
<mode>
(&F)
0
1
(str)
<serv>
"REL ASYNC"
Notes
•
The PLMN influences the second air interface (to the terminator), therefore another mode may be established
from the network.
•
Setting the value of
<mode>
default result code/URC.
•
The PIN is required for the write command only.
TC35i_ATC_V02.07
Confidential / Released
disable
enable
asynchronous non-transparent
to 1 may lead to connection failure, if the application (e.g. WinFax) waits for
Page 175 of 439
s
m
obile
1/30/04