Siemens TC35i User Manual page 234

TC35i AT Command Set
9.9 AT+CLIP
Command Description
This command refers to the GSM supplementary service CLIP (Calling Line Identification Presentation) that
enables a called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile ter-
minated call.
Write command enables or disables the presentation of the CLI at the TE. It has no effect on the execution of the
supplementary service CLIP in the network.
Parameter Description
(num)(&W)(&V)
<n>
(&F)
[0]
1
(num)(&V)
<m>
0
1
2
(str)
<number>
string type phone number of calling address in format specified by
(num)
<type>
type of address octet in integer format; 145 when dialling string includes in-ternational access code character
"+", otherwise 129.
(num)
<CLI validity>
0
1
2
When CLI is not available (
will not be significant. Nevertheless, TA shall return the recommended value 128 for
unknown in accordance with GSM 04.08 subclause 10.5.4.7).
When CLI has been withheld by the originator, (
"override category" option (refer GSM 02.81 and GSM 03.81),
TA shall return the same setting for
TC35i_ATC_V02.07
Confidential / Released
suppress unsolicited result codes
display unsolicited result codes
CLIP not provisioned
CLIP provisioned
unknown
CLI valid
CLI has been withheld by the originator.
CLI is not available due to interworking problems or limitations of originating
network.
<number>
significant.
=2),
<CLI validity> <number>
<CLI validity>
and
<number> <type>
Page 234 of 439
<type>
shall be an empty string ("") and
shall be an empty string ("") and
=1) and the CLIP is provisioned with the
and
<number>
as if the CLI was not available.
s
m
obile
value will not be
<type>
<type>
(TON/NPI
<type>
is provided. Otherwise,
<type>
1/30/04
value