TC35i AT Command Set
15.11 AT^SNFI
Notes
•
Write command works only in audio modes 2 to 6!
•
Read and write options of this command refer to the active audio mode.
•
The range of
<inCalibrate>
= 65535 will cause a failure.
brate>
•
Changed values have to be stored with
•
Attention! When you adjust audio parameters avoid exceeding the maximum allowed level. Bear in mind that
exposure to excessive levels of noise can cause physical damage to users!
•
The default values are customer specific.
TC35i_ATC_V02.07
Confidential / Released
is up to 65535 but will be suppressed to 32767. Values above
.
AT^SNFW
Page 379 of 439
s
m
obile
<inCali-
1/30/04