Xerox Telecopier 7017 Technical Reference Manual page 163

Test Group C, Ram Clear
This menu selection will allow you to clear ALL
RAM (Random Access Memory) or clear just
the system RAM (PROGRAM) leaving the
customer selected information
including the Dial Directory.
Caution:
Read the entire procedure before clearing
RAM.
To start the test.
1. Select Menu 82.
The following display will appear.
82 RAM CLEAR
PRESS (START) OF (SCROLL)
2. Press the Start button.
The following display will appear.
CAUTION: THIS WILL CLEAR ALL SYSTEM DATA
PRESS (START) OF (STOP)
2. Press the Start button.
The following display will appear.
82 RAM CLEAR >ALL
PRESS (SELECT) TO CHANGE THEN ENTER
3. Press the Select button to change to
PROGRAM.
The following display will appear.
82 RAM CLEAR >PROGRAM
PRESS (SELECT) TO CHANGE THEN ENTER
4. Press the Enter button.
This will clear all system RAM leaving the
customer programmed information
memory.
Ram Clear, Counters Reset
Test Group C, Counters Reset
This test will allow you to reset the following
scanning and recording counters listed in the
Options Report: All counters (Operation and
intact, Malfunction), Operation or Malfunction.
To start the test.
1. Obtain an Options Report
2. Select Menu 83.
The following display will appear.
82 COUNTERS RESET
PRESS (START) OF (SCROLL)
3. Press the Start button.
The following display will appear.
COUNTERS RESET >ALL
PRESS (SELECT) TO CHANGE THEN ENTER
4. Press the Select button to select counter
you wish to reset (ALL, OPERATION OR
MALFUNCTION).
The following display will appear.
82 COUNTERS RESET >ALL
COMPLETE
5. Press the Stop button, or allow time out.
6. Obtain a final Options Report to verify
test.
in
www.printcopy.info
8/88
6-46 Telecopier 7017 / 7017SF