Xerox Telecopier 7017 Technical Reference Manual page 128

Checking Diagnostics Operation
1. Select "24 Diagnostics"
a. Press the Menu key.
b. Press the 2 key, then the 4 key.
The display will indicate:
24 DIAGNOSTICS
PRESS [START] OR [SCROLL]
2. Press the Start key
The display will show various testing functions
and illuminate each of the control panel
indicators.
3. If an error code is displayed, restart
diagnostics
a. Record the error code.
b. Press the Start key again to continue the
diagnostics.
The terminal will print a test pattern towards
the end of diagnostics. When diagnostics is
complete, the display will momentarily
indicate:
24 DIAGNOSTICS
COMPLETE
Installation
4. Evaluate the diagnostic operation
a. If an error code was displayed during
diagnostics, refer to level 1.
b. Compare the printout with the sample
in the "Copy Quality" section.
c. If the test pattern compares, the printer
electronics are functioning correctly.
d. If the comparison does not agree, refer
to level 1.
6/88
www.printcopy.info
6-12
RX (Only) Remote Diagnostics Setup
Include remote diagnostics
installation procedure (see
Diagnostics for RX).
Telecopier 7017 / 7017SF
setup in
Remote