Transmitter Connection Status; Table 6-1: Transmitter Connection Status - Honeywell SmartLine User Manual

6. Operation

6.2. Transmitter connection status

6.2 Transmitter connection status
Displayed Definition
status
NO-KEY
Transmitter needs a key from the
Provisioning Device and is not transmitting.
UNJOINED Transmitter has backed off and is in between
discovery attempts.
DISCOVER
Transmitter has not made a connection to a
FDAP and is in discovery (searching for a
connection to a FDAP). Transmitter will
automatically enter a power saving mode if it
cannot make a connection and will retry later.
RXADVERT The transmitter has received an
advertisement message for the ISA network
FIND MAC The transmitter is attempting to find the MAC
of the nearest FDAP
WAIT MAC The transmitter is waiting for the FDAP to
respond with its MAC address
SENDSMJR The transmitter is sending a Join Request to
the Security Manange Network Object
SMJRSENT
The transmitter has sent a Join Request to
the Security Manange Network Object and is
awaiting a response
SENDSMCR The transmitter is sending a Control Request
to the Security Manager Network Object
SMCRSENT The transmitter has sent a ControlRequest to
the Security Manager Network Object and is
awaiting a response
52

Table 6-1: Transmitter connection status

SmartLine Wireless User's Manual
What to do
Transmit a key to the transmitter.
See page 60.
If Transmitter does not join the network
within five minutes, do the following:

Check that Key is correct for the network
you are trying to join.

Check that FDAP(s) in the local area are
turned on and are already a secure part
of the network.

Check if KeyServer is active.

Check the KeyServer Event Log to see if
the Transmitter is actively trying to join.
Errors in the Event Log show that the
Transmitter is trying to join but that there
are problems. Consult the OneWireless
User Interface documentation for
troubleshooting errors.
Wait for connection. If Transmitter does not
make a connection within five minutes, see
UNJOINED in this table.
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
Revision 2