Honeywell SmartLine User Manual page 105

Wireless Pressure continued ..
Name Description
SENSOR_DEVREV Device Revision
SENSOR_BUILD Software Version
MAINTENANCE_ALERT Maintenance Alert
MAINTENANCE_ALERT.ALERT_DISABLE Enable or Disable the Alert
MAINTENANCE_ALERT.ALERT_PRIORITY Priority set for the Alert
OUT_OF_SPEC_ALERT Out of Specification Alert
OUT_OF_SPEC_ALERT.ALERT_DISABLE Enable or Disable the Alert
Priority set for the Alert
OUT_OF_SPEC_ALERT.ALERT_PRIORITY
FUNCTION_CHECK_ALERT Function Check Alert
FUNCTION_CHECK_ALERT.ALERT_DISABLE Enable or Disable the Alert
FUNCTION_CHECK_ALERT.ALERT_PRIORITY Priority set for the Alert
FAILURE_STATUS_ALERT Failure Status Alert
FAILURE_STATUS_ALERT.ALERT_DISABLE Enable or Disable the Alert
FAILURE_STATUS_ALERT.ALERT_PRIORITY Priority set for the Alert
Power source
POWER_SOURCE
V_POWER Power voltage
EUI_64 Field device radio EUI64 unique identifier.
DL_ALIAS_16_BIT Field device radio short address.
NETWORK_ADDRESS_128_BIT Field device radio IP6 address.
DEVICE_ROLE_CAPABILITY Field device radio role capability.
VENDOR_ID Field device radio vendor ID.
MODEL_ID Field device radio model ID.
TAG_NAME Field device tag name.
SERIAL_NUMBER Field device radio serial number.
Field device power supply status.
POWER_SUPPLY_STATUS
JOIN_COMMAND Field device radio join command.
RESTART_COUNT Field device radio restart counter.
UPTIME Field device radio uptime.
SOFTWARE_REVISION Field device radio revision.
DROP_OFF_COUNT Field device radio network drop off counter.
JOIN_ATTEMPT_COUNT Field device radio network join attempt counter.
Field device radio reset counters command.
RESET_COUNTERS
ROUTING_ASSIGNMENT Field device radio network routing assignment.
Revision 2
Data Type Data Size Access Class Enum Value
Uint16 2 Read Only Static
Uint16 2 Read Only Static
BinaryAlarmDesc 2 Read/Write Static
Boolean 1 Read/Write Static
Uint8 1 Read/Write Static
BinaryAlarmDesc 2 Read/Write Static
Boolean 1 Read/Write Static
Uint8 1 Read/Write Static
BinaryAlarmDesc 2 Read/Write Static
Boolean 1 Read/Write Static
Uint8 1 Read/Write Static
BinaryAlarmDesc 2 Read/Write Static
Boolean 1 Read/Write Static
Uint8 1 Read/Write Static
Uint8 1 Read Only Dynamic
1 - Battery Module
2 - 24V External Power Module
Float 4 Read Only Dynamic
OctetString 0 Read Only Constant
Uint16 2 Read Only Static
OctetString 0 Read Only Static
Uint16 2 Read Only Constant
128 - Provisioning Device
64 - System Time Source
32 - Security Manager
16 - System Manager
8 - Gateway
4 - Access Point
2 - Routing Device
1 - I/O Device
VisibleString 16 Read Only Constant
VisibleString 16 Read Only Constant
VisibleString 16 Read/Write Static
VisibleString 16 Read Only Constant
Uint8 1 Read Only Dynamic
0 - Line Powered
1 - Battery
2 - Battery
3 - Battery
Uint8 1 Read/Write Static
0 - None
2 - Warm Restart
3 - Restart as Provisioned
Uint16 2 Read Only Static
Uint32 4 Read Only Dynamic
VisibleString 16 Read Only Constant
Uint16 2 Read Only Static
Uint16 2 Read Only Static
Boolean 1 Read/Write Static
Uint8 1 Read/Write Static
0 - Routing Disabled
1 - Routing Enabled
2 - Not Applicable
SmartLine Wireles User's Manual
Enum Description
Device is powered by internal battery
Device is powered using 24V external
power
Provisioning Device
System Time Source
Security Manager
System Manager
Gateway
Access Point
Routing Device
I/O Device
Line Powered
High Battery powered greater than 75% remaining
Medium Battery powered between 25% to 75% remaining
Low Battery powered less than 25% remaining
None
Warm Restart
Restart as Provisioned
Routing Disabled
Routing Enabled
Not Applicable
91