Directional Mounting Procedure - Honeywell SmartLine User Manual

3. Installation
3.12. Remote antenna
Step
10
When attaching the coax cable to the SmartLine Wireless transmitter, it is recommended that a
drip loop with a radius of at least 12 inches (30 cm) be formed close to the SmartLine
transmitter. This will minimize ice and water buildup on the transmitter itself. Tighten cables by
hand only; do not use tools or you could overtighten.
To lightning
arrestor & antenna

Directional mounting procedure

Step
1
Secure mast mounting bracket to mast as shown using 2 U-bolts and supplied hardware.
2
Attach antenna to mast mounting bracket as shown using supplied hardware.
3
Adjust antenna to desired tilt and lock into place using the antenna tilt adjustment nut.
34
Action
12"/30cm
Drip loop
Action
SmartLine Wireless User's Manual Revision 2