Figure 3-6: Angle Mounting Bracket Secured To A Horizontal Or Vertical Pipe - Honeywell SmartLine User Manual

Bracket Mounting Procedure
If you are using an optional bracket, start with Step 1. For an existing bracket, start with Step 2.
1. Refer to Figure 3-6.
install a "U" bolt around the pipe and through the holes in the bracket. Secure the bracket with
the nuts and lock washers provided.
Mounting
Bracket
Horizontal Pipe

Figure 3-6: Angle Mounting Bracket Secured to a Horizontal or Vertical Pipe

2. Align the appropriate mounting holes in the Transmitter with the holes in the bracket. Use the
bolts and washers provided to secure the Transmitter to the bracket; see the following variations.
Transmitter Type
DP with double-ended process
heads and/or remote seals
In-line GP and AP (STGWxxL and
STAWxxL)
Dual-head GP and AP
EXAMPLE: Inline model mounted to an optional angle bracket. See
Figure 3-7.
Revision 2
Position the bracket on a 2-inch (50.8 mm) horizontal or vertical pipe, and
Nuts and
Lockwashers
U-Bolt
Alternate mounting holes in the ends of
the heads
The smaller "U" bolt provided to attach the
meter body to the bracket. See the
following example.
Mounting holes in the end of the process
head.
SmartLine Wireles User's Manual
3.7. Mounting Summary
Nuts and
Lockwashers
U-Bolt
Vertical Pipe
Use Hardware
3. Installation
Mounting
Bracket
17