Transmitter Status - Honeywell XNX Technical Manual

XNX Universal Transmitter
Figure 168. Transmitter Software, 4-20 Monitor and Option Version
Transmitter Data is also used to update the configuration of the
XNX when an option board is added or changed� To add the new
option, use the switches to navigate to the Option Revision
screen, then swipe the magnetic switch on the front panel to
✓
display the Accept New Option Screen� The screen will show
the current option (if any) and the newly installed option� Use the
switches to highlight the option then swipe the
switch on the front panel to accept the change� The transmitter
will update the part number of the unit� The new option will then
be operational�
✓
Figure 169. Updating The XNX for Option Boards Added or Changed
Section 2 - Installation and Operation
?
Transmitter Status displays information about the XNX unit
including temperature, 4-20 mA output value, and supply
voltage�
magnetic
✓
✖
84

Transmitter Status

Figure 170. Transmitter Status Screen
Figure 171. Transmitter Temperature and Supply Voltage Screens