Installation And Start-Up; General Guidelines; Standard Mounting - Honeywell Satellite XT 9602-0400 FTT Manual To Operation

2.1

General Guidelines

Please consider the aspects indicated below before locating the instrument.
The property of the target gas (lighter or heavier than air) must be considered. The
instrument should be mounted as close to the monitoring location as possible and should
be easily accessible for operation and maintenance. For narrow monitoring locations or
duct mounting a sensor extension with a standard length of 2m (6 feet) is available as an
option.
The optimum position to mount the instrument is in an upright position on a flat surface. If
the instrument is used for ambient air monitoring, ensure that the sensor is facing
downwards. For personal monitoring applications the instrument should be mounted at
head level.
Ensure that the area immediately surrounding the instrument is free from objects that
might hinder free flow of air. The instrument should be installed away from any possible
liquid sources, extreme dust and dirt sources and should be protected against rain and
sunlight. An instrument version protection class IP 65 is available for outdoor applications.
A junction box is recommended to connect the instrument to external control systems.
A distance of 2 m (6 feet) must not be exceeded.
Regarding the power requirements and operating conditions, please follow the
specifications indicated in Section 1, Technical Specifications, for wiring instructions refer
to Section 2, Wiring.
Sensors should be stored in a cool, dry place when not in use.
2.2

Standard Mounting

The instrument is designed for DIN–rail mounting. The mounting rail standard shipped with
each instrument is used for wall mounting. Mount the DIN–rail to a wall and fasten the
instrument with the sensor downwards and the display facing the front.
Attach the wires to the junction box according to the wiring diagram provided in the course
of this section..
Mounting rail standard (P/N 9602.0050.10.03)
Standard mounting rail (P/N 9602.0050.10.03)
Satellite XT FTT Versions
Installation and Start-Up - Section 2
90,0 7,5
2-1