Repairing The Column Compartment; Introduction Into Repairing The Column Compartment - Agilent Technologies 1100 Series Reference Manual

4

Repairing the Column Compartment

Introduction into Repairing the Column Compartment

Simple Repairs
The column compartment is designed for easy repair. The most frequent
repairs such as change of column and column switching valve head parts can
be done from the front of the column compartment with the column
compartment in place in the system stack. These repairs are described in
"Simple Repairs"
Exchanging Internal Parts
Some repairs may require exchange of defective internal parts. Exchange of
these parts requires removing the column compartment from the stack,
removing the covers, and disassembling the column compartment. The
security lever at the power input socket prevents that the column
compartment cover is taken off when line power is still connected. These
repairs are described in
To prevent personal injury, the power cable must be removed from the column
WA RN ING
compartment before opening the column compartment cover. Do not connect the
power cable to the column compartment while the covers are removed.
When working with solvents please observe appropriate safety procedures (for
example, goggles, safety gloves and protective clothing) as described in the
material handling and safety data sheet supplied by the solvent vendor, especially
when toxic or hazardous solvents are used.
Electronic boards and components are sensitive to electronic discharge (ESD). In order
CAU TI O N
to prevent damage always use an ESD protection (for example, the ESD wrist strap
from the accessory kit) when handling electronic boards and components, see
the ESD StrapElectronic boards are sensitive to electronic discharge (ESD). In order to
prevent damage, always use an ESD strap supplied in the standard accessory kit (see
"Accessory Kit" on page 116) when handling electronic boards and components."
page 53.
52
on page 56.
"Exchanging Internal Parts" on page 63.
1100 Series TCC Reference Manual
"Using
on