Removing the Heat Exchanger Assemblies
When required
Tools required
Parts required
Preparations for this procedure:
•
Turn off the column compartment.
•
Disconnect the power cable.
•
Disconnect capillaries.
•
Remove column compartment from stack
and place it on the working bench.
•
Remove the front cover, top cover and top
foam section, see
the Top Cover"
1100 Series TCC Reference Manual
If the heater is leaking, blocked or does not heat/cool or other assemblies have
to be removed
Screwdriver Pozidriv 1 PT3
Wrench 1/4 – 5/16 inch for capillary connections
Heat exchanger assembly (left) G1316-60007, includes ambient temperature
sensor
Heat exchanger assembly (right) G1316-60006
"Installing the Foam and
on page 96.
Repairing the Column Compartment
1 Disconnect the heat exchanger cables from the processor
board and the grounding connection of the column
switching valve.
4
81