Agilent Technologies 1100 Series Reference Manual page 20

1
Installing the Column Compartment
Figure 5
The column compartment is turned on when the line power switch is pressed and the green
NO TE
indicator lamp is illuminated. The column compartment is turned off when the line power
switch is protruding and the green light is off.
To disconnect the column compartment from line, unplug the power cord. The power
WA RN ING
supply still uses some power, even if the power switch at the front panel is turned
off.
The column compartment was shipped with default configuration settings. For changing of
NO TE
these setting, see
10
APG Remote
RS-232C
Rear View of the Thermostatted Column Compartment
"Setting the 8-bit Configuration Switch"
Security lever
GPIB
CAN
Configuration switch
on page 157.
1100 Series TCC Reference Manual
Power