System Configuration Of Slave Terminals - Omron Sysmac NX-PD1000 User Manual

Symbol
(D) Support Software
(Sysmac Studio)
1-2-2

System Configuration of Slave Terminals

A building-block remote I/O slave provided with a group of NX Units connected to a Communications
Coupler Unit is generically called a Slave Terminal.
The NX Units can be flexibly combined with a Communications Coupler Unit to achieve the optimum
remote I/O slave for the application with less wiring, less work, and less space.
The following figure shows an example of the system configuration when an EtherCAT Coupler Unit is
used as a Communications Coupler Unit.
Refer to the user's manual for the connected Communications Coupler Unit for details on how to con-
figure the system when any other type of Communications Coupler Unit is used.
(E) Support Software
.xml
(F) ESI files
(E) Support Software
(F) ESI files
*1. The connection method for the Support Software depends on the model of the CPU Unit or
Industrial PC.
NX-series System Units User's Manual (W523)
Item
A computer software application for setting, programming, debugging, and
troubleshooting NJ/NX/NY-series Controllers.
For an NX1P2 CPU Unit, this application performs setting operation by making
a connection to a built-in EtherNet/IP port.
*1
(A) EtherCAT master
NJ/NX-series CPU Unit, NY-series Industrial PC or
master from another manufacturer
EtherCAT port
(G) Communications cable
Ethernet cables
Peripheral USB port
Connection to peripheral USB
port on EtherCAT Coupler Unit
.xml
1 Features and System Configuration
Description
• EtherCAT Slave Terminal
(B) NX-series
EtherCAT Coupler Unit
NX-ECC20
(D) End Cover
(C) NX Units
1
1 - 5