Omron Sysmac NX-PD1000 User Manual page 111

Attaching a Terminal Block
1
Mount the terminal block hook on the guide at the bottom of the NX Unit, lift up the terminal
block, and press in on the top of the terminal block until you hear it engage.
The terminal block will click into place on the Unit.
After you mount the terminal block, make sure that it is locked to the Unit.
Mount a terminal block that is applicable to each Unit model.
Refer to Applicable Terminal Blocks for Each Unit Model on page 3-5 for the applicable terminal
blocks.
NX-series System Units User's Manual (W523)
Hook Guide
4 Installation and Wiring
4
4 - 51