Omron Sysmac NX-PD1000 User Manual page 29

Manual name
NX-series Ether- W536
TM
Net/IP Coupler Unit
User's Manual
NJ/NX-series CPU Unit W505
Built-in EtherCAT Port
User's Manual
NY-series IPC Machine W562
Controller Industrial
Panel PC / Industrial
Box PC Built-in Ether-
CAT® Port
User's Manual
NX-series System Units User's Manual (W523)
Cat. No. Model numbers
NX-EIC202
NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
NY532-
NY512-
Application
Learning how to The following items are described: the
use an NX-series overall system and configuration meth-
EtherNet/IP Cou- ods of an EtherNet/IP Slave Terminal
pler Unit and Eth- (which consists of an NX-series Ether-
erNet/IP Slave Net/IP Coupler Unit and NX Units), and
Terminals information on hardware, setup, and
functions to set up, control, and monitor
NX Units.
Using the built-in Information on the built-in EtherCAT
EtherCAT port on port is provided.
an NJ/NX-series
This manual provides an introduction
CPU Unit
and provides information on the config-
uration, features, and setup.
Using the built-in Information on the built-in EtherCAT
EtherCAT port on port is provided.
an NY-series
This manual provides an introduction
Industrial PC
and provides information on the config-
uration, features, and setup.
Related Manuals
Description
27