Omron Sysmac NX-PD1000 User Manual page 102

4 Installation and Wiring
Connecting/Removing Wires
This section describes how to connect and remove wires.
 Terminal Block Parts and Names
 Required Tools
Use a flat-blade screwdriver to connect and remove wires.
Use the following flat-blade screwdriver.
Side view
8 to 12°
0.4 mm
Recommended screwdriver
Model
SZF 0-0,4×2,5
4 - 42
Release hole
Terminal hole
Front view
2.5-mm dia.
2.5 mm
Manufacturer
Phoenix Contact
NX-series System Units User's Manual (W523)