11 Maintenance Instructions
•
Remove flue gas baffle plates from secondary heat
exchanger from the front (Fig. 39).
•
Remove the screws from the lower rear panel
at the lower back of the boiler. Remove this panel
(Fig. 40).
•
Remove tension spring assembly below vent
connection, lift the insulation upward to expose
clean-out cover, and fasten with springs as shown
(Fig. 40).
•
Remove clean-out covers from back section and
flue gas collector.
•
The required brushes necessary for cleaning are
as shown (Fig. 41).
22
Baffle plates
Fig. 39
Clean-out covers
Fig. 40
Fig. 41